M-Box > News

Implement Error Proofing System “Poka Yoke” in your factory with the help of M-Box

Poka-Yoke is Lean Manufacturing tool to detect possible errors in the production process, prevent them and thus avoid defects in manufactured parts.
Continue Reading

Evolution of the “Andon” system in your factory with the help of M-Box

Andon is a Lean tool that through light signal reports problems in work area, in order to take measures to prevent them from occurring again.
Continue Reading
SMED and Formula 1 Pit Stop

What SMED (Single Minute Exchange of Die) Is and How to Implement It In Your Factory

SMED (Single minute exchange of die) is a Lean Manufacturing technique that allows significantly reduce product changeover time
Continue Reading

What is Total Productive Maintenance (TPM) and How to Implement It In a Factory

Total Productive Maintenance improves the quality of the work environment, and develops a culture of responsibility, communication, and continuous learning.
Continue Reading

Lean Manufacturing and Injection Moulding/Mould Making

For any injection moulder or mould maker looking to adopt a Lean philosophy, M-Box production monitoring system reveals opportunities for improvements with respect to activities that do not add value.
Continue Reading

Reduce Six Big Losses of Equipment (TPM) with the help of M-Box

TPM's goal is to reduce: equipment failure loss, minor stops and idling loss, speed loss, set-up and adjustment loss, yield loss, defect and rework loss.
Continue Reading
A woman is running with the pedometer on her arm.

Take the Pulse of Your Factory with M-Box Monitoring System

Anyone using a Fitbit or step-counter (pedometer) knows its impact. It drives to more exercise, more steps. The same principle applies for factory operations by means of monitoring system.
Continue Reading
M-Box Factory Monitoring system saves money

How Factory Monitoring System Saves Money

Smart factory monitoring systems are now available for any size of operation, not just multinationals. Every workshop can connect to the IoT with M-Box.
Continue Reading
CNC Machine Monitoring Software - M-Box

CNC Machine Monitoring Software and Hardware System to Transform your Shop Floor

CNC Machine Monitoring software and hardware components help jump start the digital transformation on the shop floor and minimize productivity losses.
Continue Reading

Monitor-Box to address practical problems in piece work operations

Piecework is normally set up as a system with a normative cycle time. This normative cycle time is the basis of the reward system. The cycle time is ideally set via clocking (chronograph) and there is a negotiation process between workers and management on the reward for each piece. In most countries law stipulates to...
Continue Reading
1 2